AutoAqua Smart ATO RO Auto Top Off System for RO

AutoAqua Smart ATO RO Auto Top Off System for RO

Smart ATO RO (SATO-460V)
Power :
- Power Input : 100-240 VAC 50-60 Hz
- Power : 4.5 W @ DC 12 V
- Power Cord Length : 6 feet (180 cm)
RO Solenoid Valve :
- Power : 6W @ 12 VDC
- Pressure : 0.02-0.7MPA
- Port : 1/4-inch RO Tubing Connection
- RO Solenoid Valve Cord Length : 4 feet (120 cm)
Max. Mounting Thickness :
- Sensor : 1/2 inch (12.7 mm)
- Universal Holder : 3/4 inch (19 mm)
Length of Cable between Sensor and Controller : 6 feet (180cm)

Save Your Resin!

Smart ATO RO is a reliable device to fill your RO or RO/DI water reservoir automatically. When the water level falls down to the low-level sensor, it will fill the reservoir up to the high-level sensor. You can avoid TDS creep in the reservoir and always get clear RO or RO/DI water for your aquariums but never have to worry about forgetting to turn off your RO or RO/DI system causing catastrophic floods.

Smart ATO RO comes with two precise dual sensors along with a float ball switch which provide extremely protection to prevent accidental floods. The magnetic-mount dual sensors allow you to set them in variety containers effortlessly and are easily to move to another container.


WATER RESISTANT DESIGN


The new jack design can prevent the connectors from getting rusted or a short circuit due to moisture or water spill from the aquarium. It secures better seal tightness and provides great water resistance.